Operation Safety

  • Keep bystanders and children away from the machine, charging station, and power supply during operation.IEC 60335-2-107 [7.12.c]

  • Wear appropriate clothing, including long pants and substantial, slip-resistant footwear, whenever you manually operate the machine.IEC 60335-2-107 [7.12.t]

  • Do not operate the machine without all safety protective devices in place and working properly or if a power cord is damaged or worn.IEC 60335-2-107 [7.12.w]

  • Inspect the area where you will use the machine and remove all objects that could interfere with the operation of the machine.CSA C22.2 No 147-15 [A.1.2.a]; IEC 60335-2-77:2010 [EE.2.b]; UL 1447 [55.2.1.c.20]; from 60V Walk-Power Mower safety

  • Use only the battery and power supply approved by the manufacturer for the machine. Do not use any battery that is not designed for use with the machine.IEC 62133-2 [Annex C (m, k)]

  • Do not use a damaged or modified battery, which may exhibit unpredictable behavior that results in fire, explosion, or risk of injury.UL 2595 [7.5.g]; from 60V Walk-Power Mower safety

  • The blades are sharp; contacting the blades can result in serious personal injury. Press the stop button and wait for all moving parts to stop before unclogging, servicing, or transporting the machine.From the robotic mower manual draft; IEC 60335-2-107 [7.12.u]

  • Keep your hands and feet away from moving parts on and under the machine.IEC 60335-2-107 [7.12.n]

  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. Walk, never run when training the machine.IEC 60335-2-107 [7.12.m]

  • Do not stand, sit, or ride on the machine or allow others to do so.From the STIHL safety content

  • If the machine strikes an object and/or starts to vibrate abnormally, immediately shut off the machine and wait for all movement to stop before examining the machine for damage. Make all necessary repairs before resuming operation.IEC 60335-2-107 [7.12.u, z, ee]

  • Press the stop button on the machine, wait for all movement to stop, and disable the machine in the following situations:IEC 60335-2-107 [7.12.(l,u,z)]

    • Before clearing blockages on the machine

    • Before checking, cleaning, or maintaining the machine (especially the blades), and the charging station

    • After the machine strikes a foreign object, is in an accident, or breaks down; examine the machine for damage and make repairs before resuming operation

    • If the machine begins to vibrate abnormally; examine the machine for damage and make repairs before resuming operation

  • Avoid using the machine and its peripherals in bad weather conditions especially when there is risk of lightning.From the HUSQVARNA safety content

  • Do not place any object on either the machine, charging station, or power supply.From the HUSQVARNA safety content

  • Do not modify the machine, software, charging station, hub, or power supply.From the STIHL safety content

  • Do not modify or override the machine controls, safety devices, or power supply.From the STIHL safety content

  • Do not use a modified machine, charging station, or power supply.From the STIHL safety content

  • We recommend not using the machine while watering or irrigating the operating area.From the HUSQVARNA safety content

  • Use only accessories approved by Toro to avoid the risk of fire, electric shock, or injury.From the robotic mower manual draft and the lithium battery charger manual

  • Press the stop button on the machine and wait for the blades to come to a complete stop before handling the machine. Carry the machine with the blade(s) away from your body.From the HUSQVARNA safety content

    G430092

  • Do not use or charge a damaged, deformed, or excessively hot battery. A damaged battery may generate heat, rupture, leak, ignite, or explode.From the STIHL safety content

  • Use the battery only for the application for which it was intended.IEC 62133-2 [Annex C (t)]

  • The battery could emit explosive gasses if it is significantly overcharged.From the robotic mower manual draft and the lithium battery charger manual

  • Do not subject the battery to mechanical shock.IEC 62133-2 [Annex C (g)]

  • Do not use or operate a damaged or improperly functioning charging station or power supply.From the STIHL safety content

  • Do not plug the charging station or the power supply into a power strip or an extension cord.From the STIHL safety content

  • Do not operate a charging station or power supply that has received a sharp or heavy blow.From the STIHL safety content

  • Do not use a charging station other than that designed for the machine; refer to the Operator’s Manual for proper charging instructions.IEC 62133-2 [Annex C (I, p)]

  • Do not connect a damaged power supply cord. Do not touch a live damaged cord.IEC 60335-2-107 [7.12.x]

Parent topic: Operation