• Keep bystanders and children away from the machine, charging station, and power supply during operation.IEC 60335-2-107 [7.12.c]

• Wear appropriate clothing, including long pants and substantial, slip-resistant footwear, whenever you manually operate the machine.IEC 60335-2-107 [7.12.t]

• Do not operate the machine without all safety protective devices in place and working properly or if a power cord is damaged or worn.IEC 60335-2-107 [7.12.w]

• Inspect the area where you will use the machine and remove all objects that could interfere with the operation of the machine.CSA C22.2 No 147-15 [A.1.2.a]; IEC 60335-2-77:2010 [EE.2.b]; UL 1447 [55.2.1.c.20]; from 60V Walk-Power Mower safety

• Use only the battery and power supply approved by the manufacturer for the machine. Do not use any battery that is not designed for use with the machine.IEC 62133-2 [Annex C (m, k)]

• Do not use a damaged or modified battery, which may exhibit unpredictable behavior that results in fire, explosion, or risk of injury.UL 2595 [7.5.g]; from 60V Walk-Power Mower safety

• The blades are sharp; contacting the blades can result in serious personal injury. Press the stop button and wait for all moving parts to stop before unclogging, servicing, or transporting the machine.From the robotic mower manual draft; IEC 60335-2-107 [7.12.u]

• Keep your hands and feet away from moving parts on and under the machine.IEC 60335-2-107 [7.12.n]

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. Walk, never run when training the machine.IEC 60335-2-107 [7.12.m]

• Do not stand, sit, or ride on the machine or allow others to do so.From the STIHL safety content

• If the machine strikes an object and/or starts to vibrate abnormally, immediately shut off the machine and wait for all movement to stop before examining the machine for damage. Make all necessary repairs before resuming operation.IEC 60335-2-107 [7.12.u, z, ee]

• Press the stop button on the machine, wait for all movement to stop, and disable the machine in the following situations:IEC 60335-2-107 [7.12.(l,u,z)]

  • Before clearing blockages on the machine

  • Before checking, cleaning, or maintaining the machine (especially the blades), and the charging station

  • After the machine strikes a foreign object, is in an accident, or breaks down; examine the machine for damage and make repairs before resuming operation

  • If the machine begins to vibrate abnormally; examine the machine for damage and make repairs before resuming operation

• Avoid using the machine and its peripherals in bad weather conditions especially when there is risk of lightning.From the HUSQVARNA safety content

• Do not place any object on either the machine, charging station, or power supply.From the HUSQVARNA safety content

• Do not modify the machine, software, charging station, hub, or power supply.From the STIHL safety content

• Do not modify or override the machine controls, safety devices, or power supply.From the STIHL safety content

• Do not use a modified machine, charging station, or power supply.From the STIHL safety content

• We recommend not using the machine while watering or irrigating the operating area.From the HUSQVARNA safety content

• Use only accessories approved by Toro to avoid the risk of fire, electric shock, or injury.From the robotic mower manual draft and the lithium battery charger manual

• Press the stop button on the machine and wait for the blades to come to a complete stop before handling the machine. Carry the machine with the blade(s) away from your body.From the HUSQVARNA safety content

  

• Do not use or charge a damaged, deformed, or excessively hot battery. A damaged battery may generate heat, rupture, leak, ignite, or explode.From the STIHL safety content

• Use the battery only for the application for which it was intended.IEC 62133-2 [Annex C (t)]

• The battery could emit explosive gasses if it is significantly overcharged.From the robotic mower manual draft and the lithium battery charger manual

• Do not subject the battery to mechanical shock.IEC 62133-2 [Annex C (g)]

• Do not use or operate a damaged or improperly functioning charging station or power supply.From the STIHL safety content

• Do not plug the charging station or the power supply into a power strip or an extension cord.From the STIHL safety content

• Do not operate a charging station or power supply that has received a sharp or heavy blow.From the STIHL safety content

• Do not use a charging station other than that designed for the machine; refer to the Operator’s Manual for proper charging instructions.IEC 62133-2 [Annex C (I, p)]

• Do not connect a damaged power supply cord. Do not touch a live damaged cord.IEC 60335-2-107 [7.12.x]

The safety-alert symbol shown in this manual and on the machine identifies important safety messages that you must follow to prevent accidents.

Safety-alert symbol appears above information that alerts you to unsafe actions or situations and is followed by the word DANGER, WARNING, or CAUTION.

This robotic lawnmower is intended to be used by residential homeowners for autonomous, programmable lawn care. {“autonomous, programmable lawn care” from the HUSQVARNA safety content} It is designed primarily for cutting grass on well-maintained lawns or residential properties. This is a maintenance lawnmower that maintains the height of the grass consistently. Using the mower, battery, charging station, and power supply for purposes other than their intended use could endanger you and bystanders. {IEC 60335-2-107 [7.12.d,e]}

Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely.

When you are not using the mower, store it indoors in a dry, secure place out of the reach of children or other unauthorized users.

• Before servicing the machine, turn the power switch underneath the machine to the Off position.

• Do not allow children to clean and maintain the machine.From the HUSQVARNA safety content

• Keep your hands and feet away from moving parts on and under the machine.IEC 60335-2-107 [7.12.g]

• The blades are sharp; contacting the blades can result in serious personal injury.*ANSI/OPEI B71.1-2017 and ANSI/OPEI B71.4-2017 [X.2]; the HUSQVARNA safety content

  • Shut off the machine.

  • Wear cut-resistant gloves when servicing the blades.

  • Do not repair or alter the blades.

• Inspect the machine often to ensure that the blades are not worn or damaged.From the robotic mower manual draft

• Maintain or replace safety and instruction labels as needed.From the robotic mower manual draft; from the lithium battery charger manual

• Disconnect the power supply from the electrical outlet before performing maintenance on or cleaning it to reduce the risk of electric shock.IEC 60335-1 [7.12.ZE2] (an older version of this standard that is no longer in the current version)

• Do not attempt to repair, open, or disassemble the charging station or power supply.From the STIHL safety content

• Take the charging station to an Authorized Service Dealer for service or repair. Do not disassemble the charging station.From the robotic mower manual draft; from the lithium battery charger manual

• For best performance, use only genuine Toro replacement parts and accessories. Other replacement parts and accessories could be dangerous, and could void the product warranty.IEC 60335-2-77:2010 [EE.4h]; from 60V Walk-Power Mower safety

• The operator/supervisor of the machine is responsible for any accidents or hazards occurring to others or their property.

• Read, understand, and follow all these instructions and warnings before using the machine.

• Improperly using or maintaining the machine could result in serious injury or death. To reduce this potential, follow all safety instructions.

• Do not allow children or untrained people to operate or service this device. Allow only people who are responsible, trained, familiar with the instructions, and physically capable to operate or service the device.

• Clean the charging port on the mower and/or charging station using a nonconductive tool (cloth or soft brush); otherwise, damage may occur.

• Wipe the charging terminals on the charging station and mower using a clean, dry cloth if they are dirty.IEC 62133-2 [Annex C (o)]

• When servicing the battery, do not wear jewelry and tie back long hair.

• Do not dismantle or open the battery.IEC 62133-2 [Annex C (a)]

• Keep the battery clean and dry.IEC 62133-2 [Annex C (n)]

• Do not use or charge the mower if it is unusually hot or emits smoke or an unusual smell.From the STIHL safety content

• Leaking battery fluid can cause skin and eye irritation or chemical burns.From the STIHL safety content

• If the battery leaks, do not allow the liquid inside the battery to contact skin or eyes. If there is contact, wash the affected area with a large amount of water and seek medical advice.IEC 62133-2 [Annex C (h)]

• Use an inert absorbent such as sand to clean up spilled battery fluid.From the STIHL safety content

• Dispose of a used battery properly.IEC 62133-2 [Annex C (v)]

• Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions.From 60V Walk-Power Mower safety

• CAUTION—A mistreated battery may present a risk of fire, explosion, or chemical burn.

  • Do not disassemble the battery.

  • Replace the battery with an approved battery only; using another type of battery may cause a fire or risk of injury.

  • Keep battery out of the reach of children.

This product contains three modular approvals:

Models may have an optional CalAmp module containing FCC ID APV-2630MB and IC 5843C-2630MB

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Ce produit contient trois approbations modulaires:

Les modèles peuvent avoir un module CalAmp en option contenant FCC ID APV-2630MB et IC 5843C-2630MB

Este equipo ha sido probado y se ha verificado que cumple los límites de un dispositivo digital de la Clase B, conforme con la Parte 15 de la normativa FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias dañinas en una instalación residencial. El equipo genera, utiliza y puede radiar energía de radiofrecuencia, y si no es instalado y utilizado con arreglo a las instrucciones, puede causar interferencias dañinas para las radiocomunicaciones. No obstante, no hay garantía alguna de que no pueda haber interferencias en una instalación determinada. Si este equipo provoca interferencias dañinas en la recepción de radio o televisión (lo que podrá comprobar apagando y encendiendo el equipo), se recomienda al usuario que corrija la interferencia aplicando una o varias de las siguientes medidas:

• Reorientar o reposicionar la antena receptora.

• Aumentar la separación entre el equipo y el receptor.

• Conectar el equipo a una toma de corriente de un circuito eléctrico diferente al del que esté conectado el receptor.

• Consult the dealer or an experienced radio/TV technician for help.

• Dirigirse al concesionario o a un técnico experto en radio/televisión para asistencia técnica.

Antenna Requirements:

This radio transmitter FCC ID: OF7-OCB IC: 3575A-OCB has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Optional CalAmp Module Requirments:

This radio transmitter FCC ID: APV-2630MB IC: 5843C-2630MB has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Exigences en matière d'antenne:

Le présent émetteur radio FCC ID: OF7-OCB IC: 3575A-OCB a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.

Exigences du module CalAmp en option:

Le présent émetteur radio FCC ID: APV-2630MB IC: 5843C-2630MB a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.